Britax 70 CS manual Forward-Facing Installation, Lap-Shoulder Belt Installation Before You Begin

Forward-Facing Installation

Lap-Shoulder Belt Installation

Before You Begin:

•Check that your vehicle belt is compatible for use with child seats. See pages 8 – 13 for more information.

* If your vehicle seat belt system includes a locking feature, use of the lock-offs is not required as long as the vehicle seat belt system is locked. Check your vehicle owner’s manual to determine how to lock your vehicle seat belt system when installing a child restraint.

•Remove the Versa-Tether from the pouch and place it up and over the child seat back.

* Britax recommends that the Versa-Tether is used at all times. Using the tether will improve the stability of the child seat and reduce the risk of injury. Check your vehicle owner’s manual for tether anchor locations. Only attach the Versa-Tether to anchor points designated to the chosen seating position as indicated by your vehicle owner’s manual.

•This child seat must be in position 1 or 2 and placed forward facing on the vehicle seat.

* Ensure that no more than 20% or 3 inches (7.6 cm) of the base hangs over the edge of the vehicle seat. See page 23 for more information.

46