Britax 70 CS manual Forward-Facing Installation

Forward-Facing Installation

1Loosen the harness.

a Lift harness adjuster lever

bPull both harness straps forward

2 Remove the body pillow and unbuckle the harness.

3 Pull the head restraint cover up, then pull the seat cover forward to access the forward-facing belt path.

4 Open the red lock-off closest to where the vehicle belt will be buckled.

a Open the locking tab

bOpen the clamp

5Route the vehicle belt through the forward-facing belt slots, then buckle. Ensure the vehicle belt is not twisted.

6Push down into the rear of the child seating area with moderate force while removing all slack from the bottom (lap) part of the vehicle belt and close the lock-off.

aClose the clamp over the vehicle belt

b Slide your palm or thumb along the locking tab until a click is heard (see page 21)

7Push the child seat down while pulling the top (shoulder) part of the belt between the belt slots to remove any remaining slack through the lock-off.

1b

	1a
LOCKING	4a
TAB

CLAMP

4b

5

7

48