Care and Maintenance
9 Replace the belly pad.
a Pull the elastic strap around the buckle.
b Push the buckle through the belly pad.
10 Attach the hook and loop | 10 | |
fasteners on the head restraint | ||
| ||
cover around the harness. |
|
11Reattach the clips behind the arm rests and slide the fabric
under the lower belt guides.
Cleaning the Buckle
If your child eats and drinks while in the child seat, you may need to check the buckle periodically and rinse out any accumulated debris or dried liquids.
Buckle Removal
1Locate the metal retainer on the
bottom of the child seat, and slide the retainer up to release it from the child seat shell.
2Turn and push the buckle retainer through the shell and cover to the top of the seat.
* Pull the belly pad over the buckle retainer to remove.
Care and Maintenance
To Clean:
•THOROUGHLY RINSE the buckle using warm water.
•TEST THE BUCKLE by fastening and unfastening until a positive click is heard after inserting each buckle tongue. If clicks are not heard, repeat the cleaning procedure.
•TOWEL DRY
•DO NOT:
*Soak
*Lubricate
*Use solvents
*Use soap or household detergents
Buckle Replacement
1Select the slot closest to, but not under the child.
2Turn and push the buckle
retainer through the slots in the cover and shell to the bottom of the child seat.
3 Pull the buckle away from the child seat until tight. Verify that the buckle retainer lies flat against the child seat shell.
* Ensure that the buckle strap is not twisted and that the button faces out.
46 | 47 |
