Britax 85 SICT manual Lap Belt, Incompatible Vehicle Seat Belts, Vehicle Buckle Positions

Vehicle Compatibility

Lap Belt

IMPORTANT: A Lap belt may only be used to install the child seat in harness mode and should never be used to secure your child in booster mode.

5.ALR (Automatic Locking Retractor)

aHas a latch plate that is sewn into the webbing.

Latch

Plate

b Has a retractor that stops the belt from being pulled out again once the belt webbing has been pulled out at least 24 in. (61 cm).

cTightens by feeding the

belt webbing back into the retractor.

6.Locking Latch Plate

aHas a latch plate that does not allow the belt to

become loose after it is buckled.

Latch

Plate

b Tightens by pulling on the	Adjuster
belt webbing.

Vehicle Compatibility

Incompatible Vehicle Seat Belts

WARNING! The following types of vehicle seat belts are NOT compatible with this child seat. If any of the belt types listed below are in the chosen seating position, choose another vehicle seating position or check your vehicle owner’s manual for information on installing a car seat in your vehicle.

1 Lap-shoulder belts	2 Motorized,	3 Lap-shoulder
with top or bottom	automatic vehicle	belts that have a
anchor points on	seat belts.	separate retractor
the vehicle door.		each for the
		lap section and
		shoulder section.

4 Inflatable lap-	5 Lap belts forward	6 Lap belts with a
shoulder belts.	of the vehicle seat	sewn-in latch plate
	bight.	that have a retractor
		that locks only in case
		of a sudden stop.

Vehicle Buckle Positions

WARNING! The position of the vehicle belt buckle can adversely affect the stability of the child seat.

If the buckle lies near the incorrect position () when the vehicle belt is tightened, try fitting the child seat in another seating position in the vehicle. If it is not possible to achieve the correct position ( ) for the buckle, then another seating position MUST be used.

10 11