Child Seat Functions
Booster Mode: Head Restraint Adjustment
WARNING! Head restraint adjustment is for use in Booster Mode ONLY. DO NOT Use the head restraint adjuster when the harness is attached.
Locking Screw
storage
1 Remove the locking screw | 2 | Lift the head restraint | |
from the head restraint | |||
| adjuster release to move |
adjuster and insert into the | the head restraint. | |
shell to store for later use. | ||
|
IMPORTANT: The vehicle belt must be positioned at or above the child’s shoulder through the shoulder belt guide.
Adjusting Buckle Position
Removing the Buckle
1 Unbuckle the harness by pressing the release button and pulling the tongues.
2Locate the buckle retainer on
the bottom of the child seat.
3 Slide the buckle retainer up |
|
or down to release it from the |
|
child seat shell. | 2 |
|
Child Seat Functions
4Pull the buckle retainer away
from the child seat to loosen.
5 Turn and push the buckle retainer through the slot in the child seat shell.
6Pull the buckle retainer
through the slots in the child seat shell and cover to the top of the child seat.
Re-threading the Buckle
IMPORTANT: Select the slot closest to, but not under the child.
1Turn and push the buckle
retainer through the slot in the cover and child seat shell.
2Pull the buckle retainer
through the slots in the cover and child seat shell to the bottom of the child seat.
3Slide the buckle retainer back into place to hold it against
the child seat shell.
4Pull the buckle away from the
child seat until tight.
* Ensure that the buckle strap is not twisted.
14 | 15 |
