Installation: Forward Facing
7�Hold shoulder belt tight, then rotate lock- off upward until secured (fig. E).
•If your vehicle is equipped with an automatic locking retractor (ALR), use of lock-offs is not required as long as ALR is activated. Check your vehicle’s owner’s manual to determine type of retractor your vehicle has, and for proper use of retractor.
8�Verify all connections are secure and restraint is stable. The restraint is secure when it cannot be moved front-to-back or side-to- side more than 1” (2.5 cm.) at belt path. If restraint is not secure, repeat procedure or use an alternate seating location.
9�If using Versa-Tether®complete Versa-Tether®installation (pages 23-26) and store excess webbing in tether pouch.
Removal
Disconnect the Versa-Tether®from tether anchor if attached. While pushing restraint firmly into vehicle seat, release lock-off and vehicle belt.