Securing Your Child
Securing Your Child
Once child restraint has been installed in the vehicle and adjustments have been made, follow these instructions to secure child.
1� Loosen harness by pushing the adjuster button located in front of the restraint, then pull the shoulder straps forward (fig.
A). |
| |
2� Release chest clip by squeezing tabs and | A | |
sliding pieces apart (fig. B). | ||
3� Unfasten harness buckle by pressing |
|
|
release button and sliding tongues out. |
| |
4� Move harness straps to the side of |
| |
restraint. |
| |
• Use harness holder located on straps and side of cover to aid in holding straps.
5� Place child in restraint.
6� Position harness straps around child and
fasten harness buckle (fig. C) and chest |
|
clip. | B |
• Proper connection of harness buckle is confirmed | |
with a positive click after inserting the second |
|
| |
buckle tongue. |
|
7� Gently pull up on harness straps to tighten lap section of harness which should fit across child’s upper thighs.
8� Slowly pull adjuster strap to tighten harness around the child (fig. D).
9� Position chest clip at middle of child’s chest, level with child’s armpits (fig. E).
10�Verify that harness is not twisted and child
is properly secured. | C |
31
