Setting Up the RPC-1 | Roland Studio Package Pro specs

Setting Up Studio Package Pro

■Setting Up the RPC-1

1.Select Options-Audio command to open the Audio Options dialog box, and click the Drivers tab.

2.Make sure that the following drivers are selected (highlighted). Note that don’t select except for following drivers.

Windows XP / 2000

Input Drivers	Output Drivers

Roland RPC-1 Multichannel 1/2	Roland RPC-1 Multichannel 1/2
Roland RPC-1 Multichannel 3/4	Roland RPC-1 Multichannel 3/4
Roland RPC-1 Multichannel 5/6	Roland RPC-1 Multichannel 5/6
Roland RPC-1 Multichannel 7/8	Roland RPC-1 Multichannel 7/8
Roland RPC-1 Multichannel 9/10
Windows Me / 98SE

Input Drivers	Output Drivers

PCM In 1/2 RolandRPC-1	WaveOut 1/2 Roland RPC-1
PCM In 3/4 RolandRPC-1	WaveOut 3/4 Roland RPC-1
PCM In 5/6 RolandRPC-1	WaveOut 5/6 Roland RPC-1
PCM In 7/8 RolandRPC-1	WaveOut 7/8 Roland RPC-1
Mon.Mixer RolandRPC-1

3.Click the General tab, and change the following params.

Number of Aux Buses

Number of Virtual Mains

Audio Driver Bit Depth

4

4

24

4.Click OK to finish setting up the RPC-1.

18

Image 18

Roland Studio Package Pro Setting Up the RPC-1, Input Drivers Output Drivers, Click OK to finish setting up the RPC-1

Contents

Page Contents Index Important Notes Main Features of Studio Package Pro IntroductionStudio Package Pro Setting Up Studio Package Pro Installing the RPC-1 Connecting Your Equipment Connect your audio devices and/or headphones Connect Midi and other devices as necessary Driver InstallationWindows Computer SI-24 Audio equipment Windows Me Setting Up Studio Package Pro Windows Windows XP Home/Professional Setting Up Studio Package Pro Making RPC-1 Settings Open the RPC-1 control panel Windows98/Me/2000Windows XP Click Done to close the RPC-1 control panel Installing Sonar To Install Sonar Starting Sonar Sonar SettingSetting Up the Midi In and Midi Out Devices There are many different way to start SONAR. Here are a few Input Drivers Output Drivers Setting Up the RPC-1Click OK to finish setting up the RPC-1 Click the General tab, and change the following params Setting Up the SI-24 Opening the Control Surface Toolbar Quick Start Listening to the Demo Song Faders Let’s Try Operating SonarTransport Master Fader Status Buttons CH Select ButtonsPAN Knobs EQ/SEND Button PLUG-IN ButtonLocate Button File Save Edit Undo Edit Copy Edit Paste Edit Delete Short CUT ButtonView Button Edit Redo Connect your guitar to the SI-24’s Guitar Hi-Z jack Record and Play Back a Guitar PerformancePrepare a New Project in the Sonar Record Your Guitar Performance on Track 1 of the Sonar Inserting FXPad Using FXPadApply EQ equalizer to a Track Operate the FXPad Setting Up a Midi Track Connect and Play a Midi Sound Module/MIDI KeyboardPlay Your Keyboard to Hear the Sound Recording Your Performance Midi Real-Time Recording Playing Back the Performance Data Change the RPC-1 Settings Using the SI-24’s DigitalMake Settings on the SI-24 and in Sonar Advanced Uses Record Fader/Pan Movements Automix in SonarRecording Audio from Digital in to the Sonar Play Back the Fader/Pan Movements Specify the Region that will be Written as an Audio File Make Settings for Exporting the AudioWriting a Mix to an Audio File Select a source bus or buses Connect the External Effects Processor to the SI-24 Send the Signal from Each Track to the External EffectApplying an External Effect Set a Sonar Bus as the External Effect Send Using Software Synthesizers Inserting a DXiClick OK to finish inserting a DXi Using the Roland SI-24 Property To Open the Roland SI-24 PropertyTo Set Your Options in the Roland SI-24 Property Index Digital Information