Roland Studio Package Pro owner manual EQ/SEND Button, PLUG-IN Button, Locate Button

Quick Start

■EQ/SEND Button

When you press the [EQ/SEND] button so it lights in red, you can control the 4-band EQ and Aux send levels of the track/bus selected by CH SELECT.

PAN knobs 1–8: EQ band #1–4 gain and freq. (Except MIDI track was selected.)

PAN knobs 9–12: Aux 1-4 send level. (Only audio track was selected.)

EQ buttons 1-4: EQ band #1–4 on/off

EQ are already assigned in the Cakewalk Normal template (Track 1-12). You need to assign EQ manually, when using other tracks or templates.

■PLUG-IN Button

When you press the [PLUG-IN] button so it lights in red, you can control DirectX 8 compatible plug-in parameters for the track/bus selected by CH SELECT.

PAN knobs 1–10:	Parameter 1-10 of plug-in selected by EQ buttons 1-4.
PAN knobs 11:	Bypass on/off of plug-in selected by EQ buttons 1-4.
EQ button 1–4:	Select plug-in 1-4.

The plug-in parameters to which the SI-24’s knobs 1–10 correspond will depend on the plug-in.

■LOCATE Button

When you press the [LOCATE] button so it lights in red, the [Num Pad 1–0] buttons will have the following functions.

[1]: Specify the Now time as the time from which a selection extends.

[2]: Specify the Now time as the time through which a selection extends.

[3]: Set loop to selection.

[4]: Loop on/off.

[5]: Set the Now time to the end of the project.

[6]: Set the Now time to the From time.

[7]: Set the Now time to the Thru time.

[8]: Set the Now time to the previous marker.

[9]: Set the Now time to the next marker.

[0]: Insert a marker at the Now time (during playback) or a specified location.

23