Roland owner manual Setting Up Studio Package Pro, Installing the RPC-1

Setting Up Studio Package Pro

Step 1: Installing the RPC-1

Install the RPC-1 into a PCI slot of your computer. Refer to the owner’s manual of your computer, and read the section(s) with titles such as “Opening the chassis,” “Installing a PCI card,” or “Adding an expansion card.” For details on PCI slots and PCI cards, refer to the manual of your computer.

1.Turn off the power of your computer, and unplug the power cable.

2.Remove the cover of your computer.

fig.eRpcset.eps

Cover of The	RPC-1
PCI Slot

3.Remove the screw from the cover of a vacant PCI slot, and remove the slot cover. (Hold on to the screw that held the cover in place, since it will be used to fasten the RPC-1.)

4.Insert the RPC-1 into the PCI slot. When doing so, note that it is not possible to insert the RPC-1 if it is oriented incorrectly.

5.Using the screw that had fastened the cover, fasten the RPC-1 in place.

6.Reattach the cover of your computer.

7.Connect the power cable to your computer.

6