Roland Studio Package Pro Driver Installation, Windows, Computer SI-24 Audio equipment

Setting Up Studio Package Pro

3.Connect MIDI and other devices as necessary.

For details on the signal flow when using the MIDI connectors of the SI-24, refer to “MIDI Ctrl: OFF” of the SI-24 Owner’s Manual.

If your MIDI file contains large amounts of system exclusive messages, the SI-24 may be unable to process the messages correctly.

MIDI IN/OUT channels 1 are used for remote control of SONAR. If you use MIDI

IN/OUT, please use channels 2–16.

When you turn on the power, turn each device on in the following order.

1.Computer

2.SI-24

3.Audio equipment

Step 3: Driver Installation

*The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in the display may not always match what appears in the manual.

■Windows 98

1.After installing the RPC-1 in a PCI slot, start up your computer.

2.The RPC-1 will automatically be detected, and the “Add New Hardware Wizard” will start up. Click “Next.”

3.Insert the included “Drivers/Update CD-ROM” into your CD-ROM drive.

4.Choose “Search for the best driver for your device. (Recommended).” and click “Next.”

8