Roland Studio Package Pro owner manual Click Done to close the RPC-1 control panel

Setting Up Studio Package Pro

5.Make settings as shown in the illustration.

Set all of the “R-Bus In 1/2”--“R-Bus In 7/8” faders to 0 dB (top).

Set pan to left or right.

Un-check both “Mute” settings.

6.Click the “Patchbay/Router” tab.

7.As shown in the illustration, set the “R-Bus Out 1/2” source to “Monitor Mixer.”

8.Click the “Hardware Settings” tab.

9.Check “Disable ... Monitor Mixer and Patchbay/Router”

or

*The wording may differ according to the OS you are using.

10.Click [Save] to assign suitable name to the settings, and then click [OK] to save them.

If for some reason the settings are changed, you can load the settings that you saved here. Click [Load] in the RPC-1 control panel to load the settings.

11.Click [Done] to close the RPC-1 control panel.

15