FREQUENTLY ASKED QUESTIONS

Why doesn’t the Alarm respond when I test it and the POWER/ALARM light is OFF?

The CO Alarm is not receiving power. It may not be plugged in all the way. Gently push the unit all the way into the outlet, and make sure the outlet is not controlled by a dimmer or switch.

Why does the Alarm sound three rapid “chirps” every minute?

If the display reads “Err,” replace the CO Alarm immediately. Units under warranty can be returned to the manufacturer for replacement. See Warranty for details.

Why does the alarm sound again about 4 minutes after I used the Silence Feature?

CO levels still indicate a potentially dangerous situation. Refer to “If Your CO Alarm Sounds” for details on how to respond to an alarm. If anyone is feeling ill, EVACUATE your home immediately.

Why does the CO Alarm sound frequently, but no high levels of CO are found in an investigation?

The CO Alarm may be improperly located. Try relocating your alarm. (Refer to “Where to Install CO Alarms.”) If frequent alarms continue, have home rechecked for potential CO problems. You may be experiencing an intermittent CO problem.

GENERAL LIMITATIONS OF CO ALARMS

This CO Alarm is intended for residential use. It is not intended for use in industrial applications where Occupational Safety and Health Administration (OSHA) requirements for carbon monoxide detectors must be met.

CO alarms may not waken all individuals. If children or others do not readily waken to the sound of the CO alarm, or if there are infants or family members with mobility limitations, make sure that someone is assigned to assist them in the event of an emergency.

CO Alarms will not work without power. This CO Alarm requires a continu- ous supply of AC power. Plug into an unswitched 120V AC outlet only.

CO Alarms for Solar or Wind Energy users and battery backup power systems: AC powered CO Alarms should only be operated with true or pure sine wave inverters. Operating this CO Alarm with most battery-powered UPS (uninterruptible power supply) products or square wave or “quasi sine wave” inverters will damage the Alarm. If you are not sure about your inverter or UPS type, please consult with the manufacturer to verify.

This CO Alarm will not sense carbon monoxide that does not reach the sensor. This CO Alarm will only sense CO at the sensor. CO may be present in other areas. Doors or other obstructions may affect the rate at which CO reaches the CO Alarm. For this reason, if bedroom doors are usually closed at night, we recommend you install a CO Alarm in each bedroom and in the hall- way between them.

CO Alarms may not sense CO on another level of the home. For example, a CO Alarm on the second level, near the bedrooms, may not sense CO in the basement. For this reason, one CO Alarm may not give adequate warning. Complete coverage is recommended. Place CO Alarms on each level of the home.

CO Alarms may not be heard. The alarm horn loudness meets or exceeds current UL standards of 85 dB at 10 feet. However, if the CO Alarm is installed outside the bedroom, it may not wake up a sound sleeper or one who has recently used drugs or has been drinking alcoholic beverages. This is espe- cially true if the door is closed or only partly open. Even persons who are awake may not hear the alarm horn if the sound is blocked by distance or closed doors. Noise from traffic, stereo, radio, television, air conditioner, or other appliances may also prevent alert persons from hearing the alarm horn. This CO Alarm is not intended for people who are hearing impaired.

CO Alarms are not a substitute for a smoke alarm. Although fire is a source of carbon monoxide, this CO Alarm does not sense smoke or fire. This CO Alarm senses CO that may be escaping unnoticed from malfunctioning furnaces, appliances, or other sources. Early warning of fire requires the installation of smoke alarms.

CO Alarms are not a substitute for life insurance. Though these CO Alarms warn against increasing CO levels, BRK Brands, Inc. does not warrant or imply in any way that they will protect lives from CO poisoning. Homeowners and renters must still insure their lives.

CO Alarms have a limited life. Although the CO Alarm and all of its parts have passed many stringent tests and are designed to be as reliable as possi- ble, any of these parts could fail at any time. Therefore, you must test your CO Alarm weekly.

CO Alarms are not foolproof. Like all other electronic devices, CO Alarms have limitations. They can only detect CO that reaches their sensors. They may not give early warning to rising CO levels if the CO is coming from a remote part of the home, away from the CO Alarm.

LIMITED WARRANTY

BRK Brands, Inc. ("BRK") the maker of First Alert® brand products, warrants that for a period of 5 years from the date of purchase, this product will be free from defects in material and workmanship. BRK, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanu- factured product or component. If the product is no longer available, replace- ment may be made with a similar product of equal or greater value This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. BRK dealers, service centers, or retail stores selling BRK products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK or an authorized service center. Further, the warranty does not cover acts of God, such as fire, flood, hurri- canes and tornadoes or any batteries that are included with this unit.

BRK shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a par- ticular purpose is limited in duration to the duration of the above warranty. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, or province to province.

How to Obtain Warranty Service:

Service: If service is required, do not return the product to your retailer. In order to obtain warranty service, contact the Consumer Affairs Division at 1-800-323-9005, 7:30 AM to 5:00 PM, Central Standard Time, Monday through Friday. To assist in serving you, please have the model number and date of purchase available when calling.

3920 Enterprise Court, Aurora, IL 60504-8132.

Battery: BRK Brands, Inc. make no warranty, express or implied, written or oral, including that of merchantability or fitness for any particular purpose with respect to battery.

For your records, please record:

Date Purchased: ____________________________

Where Purchased: ___________________________

First Alert® is a registered trademark of the First Alert Trust.

M08-0054-001 P 04/03

5

Page 5
Image 5
BRK electronic FCD2DDNP user manual General Limitations of CO Alarms, Limited Warranty, How to Obtain Warranty Service

FCD2DDNP specifications

The BRK electronic FCD2DDNP is a state-of-the-art smoke and carbon monoxide alarm designed for residential and commercial safety. This device exemplifies the best in advanced detection technologies, ensuring users benefit from reliable protection against the dangers posed by smoke, fire, and harmful gases.

One of the key features of the FCD2DDNP is its dual-sensor technology. This innovative approach combines both photoelectric and ionization sensors, allowing the alarm to detect a wide range of fire types. Photoelectric sensors are particularly effective for detecting smoldering fires, which may produce a lot of smoke without much heat. On the other hand, ionization sensors are more responsive to fast-flaming fires, providing a comprehensive detection capability that enhances overall safety.

Another significant characteristic of the FCD2DDNP is its built-in carbon monoxide detector. Carbon monoxide is a silent killer, and this device actively monitors levels of this dangerous gas in the environment. The integrated CO sensor provides an additional layer of security, alerting users to dangerous conditions before they become life-threatening.

The FCD2DDNP also features a user-friendly design. Its intuitive controls allow for easy testing and maintenance, ensuring that the device is functioning correctly at all times. The alarm is equipped with a loud 85-decibel siren, which guarantees that alerts can be heard even during the night, crucial for waking individuals and ensuring their safety.

Moreover, the FCD2DDNP is designed with a long-lasting battery life. The device typically uses a sealed lithium battery that can last for up to 10 years, eliminating the need for frequent replacements. This feature not only enhances convenience but also ensures that the alarm remains operational without regular maintenance concerns.

In addition to its technical capabilities, the FCD2DDNP encompasses a sleek and unobtrusive design, making it easy to integrate into various home aesthetics. With its compact size, it can be installed in multiple locations, from hallways to living rooms, enhancing safety without compromising the visual appeal of the environment.

Lastly, the BRK electronic FCD2DDNP is compliant with rigorous safety standards, offering peace of mind for users. With its combination of advanced detection technologies, user-friendly features, and reliable performance, the FCD2DDNP stands out as a top choice for anyone looking to enhance their safety and protection against fire and carbon monoxide hazards.