LED

LCD LED

LCD LED

LCD LED

On the DGP2-648BL LED keypad, follow this procedure:

1.Enter your [ACCESS CODE] and press the [TRBL] button.

2.Press the [8] button.

3.Enter the hour and minutes according to the 24-hour clock (i.e. 9AM is 09:00 and 9PM is 21:00).

4.Enter the correct date according to yyyy/mm/dd.

5.Press [CLEAR].

10.5Programming Chime Zones

You can program the keypad to emit a rapid, intermittent beep tone whenever designated zones are opened or only when opened between certain hours. These zones are referred to as Chime Zones. Your installer can also program your Chime zones to beep upon closure.

How do I program chime zones?

1.Enter your [ACCESS CODE].

2.Press the [9] key.

3.Press the [1] key to chime a zone. Enter the number corresponding to the zone to be chimed, or use the [S] and [T] buttons to scroll the list of zones. Press the [ACC] button to chime or unchime the zone that appears on the screen. Press [ENTER] to save.

OR

Press the [2] button to set the time period a chimed zone will beep. Enter the time that the chimed zone(s) will start beeping when opened (HH:MM). Enter the time that the chimed zone(s) will stop beeping when opened (HH:MM).

4.Press [CLEAR] to exit chime programming.

10.6Panic Alarms

Your system can be programmed to send an alarm to your monitoring station to request help from the police, a medical facility, the fire department, or anyone you wish when you press a predetermined combination of buttons. To generate a panic alarm, simultaneously press and hold the button combinations displayed in Table 4 on page 22. Your installer can program the alarm to be either silent or audible.

 

Table 4: Panic Buttons

Panic Alarm Types

 

Buttons to be pressed and held

 

simultaneously

 

 

Emergency Panic

 

Press & hold the [1] and [3] buttons

Auxiliary Panic

 

Press & hold the [4] and [6] buttons

Fire Panic

 

Press & hold the [7] and [9] buttons

10.7Quick Function Buttons

You will only need to use the Quick Function Buttons upon your installer’s or monitoring station's request. Only the System Master Code or user access codes with the Master feature enabled will be able to access these functions.

To access the Quick Function Buttons:

1.Enter your [ACCESS CODE]

2.Press the [0] button.

3.Press the:

[STAY] to send a test report to the monitoring station. [FORCE] to call the WinLoad software.

[ARM] to answer the WinLoad software.

[DISARM] to cancel communication with the WinLoad software.

22 User Guide

Page 24
Image 24
Paradox Hellas S.A EVO192, EVO48 manual Programming Chime Zones, Panic Alarms, Quick Function Buttons