7.0 Access Codes
Access Codes allow access to the system. Your system supports up to 999 user access codes. Codes are given a User Number between 002 and 999 (User Number 001 is the System Master Code). Your installer will program user access codes to be four, six, or variables of one to six digits in length. Each digit can be any value between zero and nine. If your installer programmed your system to accept a variable code length, you have to press the [ENTER] button after entering your user access code.
|
| 7.1 System Master Code (Default 123456) |
LCD LED |
| |
| The System Master Code will give you access to all the features available on your | |
|
| |
|
| system, as well as the ability to add, modify, or delete any user access codes. We |
|
| suggest that you change this code to prevent others from accessing and changing |
|
| options without authorization. Your installer can set the System Master Code to be either |
|
| 4 or 6 digits in length. |
To change the System Master Code:
1.Enter the current [SYSTEM MASTER CODE] (default: 123456).
2.Press the [0] button.
3.Press the [ACC] button.
4.Enter the numbers [0] [0] and [1].
5.Enter a [NEW CODE].
6.Press the [ENTER] button to save and exit.
The System Master Code has access to all Access Control doors and all Access Control features at all times. Only the card’s serial number and the choice of arming method can be changed. If the other options are manually changed, the System Master Code will immediately revert to its original programming.
You can assign a label (name) to a user access code at any point during the “Programming User Access Code” process. Refer to section 7.3 on page 11 to assign a User Label.
LCD
LCD
7.2Copy User Options
This feature allows you to copy the User Options, Access Control Options, and Area Assignments from one user access code to another. All User Options are copied except the User Code, Card Assignment, and User Label.
To copy user options:
1.Enter your [ACCESS CODE] (System Master Code or user access code with Master feature).
2.Press the [0] button, and then the [ACC] button.
3.Enter the
4.Press the [MEM] button.
5.Enter the
6.Enter a user code. If the user code is of variable length, press the [ENTER] button after entering the user code. If necessary, assign an Access card (step 13 in section 7.5.1 on page 14) and User Label (section 7.3 on page 11).
7.Press [ENTER] to save and exit.
7.3User Labels
User labels personalize user access codes and can be assigned by pressing [ENTER] at any point after step 4 during the programming of user access codes (refer to section 7.5.1 on page 14). For Example, LCD keypads can display John Smith Select Action.
To program a user label:
1.At any point after step 4 in section 7.5.1 on page 14:
2.Press the [ENTER] button.
3.Type the desired characters as detailed in section 7.3.1 on page 12 and section 7.3.2 on page 12.
