Connecting the PC5220 and Drivers to your Laptop PC
1. Insert the PC5220 into your laptop PC’s PC Card Slot with the label f acing up. Then,
raise the antenna so that it is fully extended and pointed up at a 90° angle. Use in any
other configuration may exceed FCC RF Exposure Limits.
2. Once you have inserted the car d proper l y, your W indows oper atin g s ystem wil l notif y you
that new hardware has been detected.
NOTE:
Windows XP only:
The Hardware Detection Wizard will launch upon insertion of the PC5220. Follow the on screen
instructions. This three-step wizard process will perform five times. The Found New Hardware
Wizard may appear asking to select a USB Root Hub. If so, click Next to continue, accepting the
already highlighted default USB Root Hub.
NOTE:
Windows 2000 and XP only:
A “Digital Signature Not Found” window may appear more than once. Please disregard the notice
and click Yes or Continue Anyway to proceed with installation.
WARNING: Once the card is inserted, do not physically remove th e PC5220 until
you have completed the Unplug/Eject process. Removing the card improperly may
cause a fatal error.
Note:
Before inserting the PC5220 into your laptop PC’s PC Card slot , it is recommended
that you remove the Installation CD from your CD-ROM drive.
driver: a driver acts like
a translator between the
device and programs tha
t
use the device.
8