Broan warranty Connect The Wiring, Complete Installation, Lamp Replacement, APE1 SERIES, Page

APE1 SERIES

CONNECT THE WIRING

GREEN

GROUND

SCREW

HOUSE

POWER

CABLE

HE0059

9 Connect House Power Cable to range hood wiring - BLACK to BLACK, WHITE to WHITE, and GREEN or

BARE WIRE to GREEN Ground Screw.

COMPLETE INSTALLATION

10 Re-install the wiring cover, bottom cover, and filters that were removed in Step 3.

LAMP REPLACEMENT

LIGHT

LENS

TAB

1Pull the Tab on the Light Lens forward to remove the lens.

Page 4

LAMP

LAMP

BASE

CAUTION: Bulb may be hot! Refer to packaging for further information.

2 Grasp Lamp at Lamp Base, tilt lamp down and pull out to remove.

NIGHT	FLUORESCENT
LIGHT	LAMP

3 Replace lamps. Use a 42 W Fluorescent Lamp, GX24Q-4 and tilt lamp up into position. For Night Light, use a 4 W, C-7 bulb.

	SLOT
4	Place front edge of light lens into Slot. Push lens up and
	snap it into place.