FUSE REPLACEMENT
IF LIGHTS FAIL TO OPERATE, DISCONNECT THE POWER AT THE SERVICE ENTRANCE. CHECK THE FUSE AND REPLACE IF NECESSARY.
1.Remove the grease filters.
2.Remove the cover of the fuse box.
3.Locate the fuse holder. Unscrew its cap and remove the fuse.
4.Replace the fuse with the same size and amperage (5x20mm, 4amp, 125volt).
Do not use fuses greater than 4 amps.
Fuses greater than 4 amps may damage the transformer.
5.Reinstall the fuse holder cap, fuse box cover and grease filters.
6.Reconnect power at the service entrance.
FUSE BOX
FUSE
FIG. 3
- 5 -
