Broan E60000 Series Reinstall Grease Drip Rail And Baffle Filters, Install Light Bulbs

16.INSTALL THE BLOWER (EXTERIOR OR IN-LINE BLOWER)

Refer to instructions included with blower.

Plug the 3-prong plug cord from rough-in plate to the 3-prong male connector inside the hood (A) and the 2-prong male connector cord from rough-in plate to the 2-prong plug inside the hood (B).

!WARNING

Do not plug the 2 cords together.

BA

HE0078

17. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS

Reinstall grease drip rail. The illustration beside shows how to reinsert the grease drip rail into the range hood.

HD0244

CAUTION

Remove protective plastic film covering filters before installing them.

NOTE:Assemble the metal handles to the filters, using provided no. 8-32 x 1/4” screws, before installing them in the hood.

It is recommended to install side filters first and finish with center one(s).

1.Insert one end of the filter into the upper channel of the hood.

2.Raise the other end toward the inside of hood and insert in the grease drip rail of the hood.

1	2
HD0245

18. INSTALL LIGHT BULBS

!WARNING

In order to prevent the risk of personal injury, do not install a lamp identified for use only in enclosed fixtures.

This hood must use 50W, 120V with GU10 base, shielded halogen bulbs (not included). (2 required for 30” and 36” hood width or 3 for 42” and 48” hood width.)

1.Install bulbs by placing the bulb leads into their grooves in the socket.

2.Gently push upwards and turn clockwise until secure.

12

HO0090

!WARNING

In order to prevent the risk of personal injury, the halogen bulbs must be cooled down before removing them.

To remove bulbs, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves. NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.

- 12 -