Broan E661 manual Install The Adapter/Damper, HD0112, HO0037 HD0113, HO0033, HO0038

4. INSTALL THE ADAPTER/DAMPER

The wall duct must be roughed-in to properly interface with the hood. Before performing the installation, make sure the adapter fits easily in the duct. If this hood replaces an existing hood, please note that location of the air exhaust can vary from one hood manufacturer to another.

NOTE: If using the optional adaptor 3¼” x 14” to 3¼” x 10” model T461, discard the provided adapter/damper and perform step 4 with the optional adaptor T461.

FOR HORIZONTAL DISCHARGE ONLY:

4.1Fold down the foldable flange of the adapter/damper. This flange must

be at 90° from the remaining flanges. See picture beside.

HD0112

4.2Using three (3) #6 x ½’’ screws provided, secure the adapter to the back of the hood. Remove tape from damper flap.

4.3Seal the adapter and the metal shutoff plate to the hood using duct tape.

HO0037

HD0113

FOR VERTICAL DISCHARGE ONLY:

4.4Using three (3) #6 x ½’’ screws provided, secure the adapter to the top of the hood. Remove tape from damper flap.

HO0033

4.5Seal the adapter and the metal plate to the hood using duct tape.

HO0038

- 7 -