CONNECT DUCTWORK
Ducted Configuration
Adjust the width of the flue mounting bracket to equal the inside width of decorative flue. Insert and tighten mounting screws to hold bracket width.
Use mounting screws and drywall anchors to secure flue mounting bracket to the ceiling as shown.
1.Use 6" round metal duct to connect the duct collar on the hood to the ductwork above.
2.Use duct tape to make all joints secure and air tight.
3.Insert the decorative flues setting them on the hood.
4.Extend the upper flue to the ceiling and secure with the mounting screws.
DECORATIVE
FLUE
DUCT TAPE
6" ROUND
METAL DUCT
FLUE MOUNTING
BRACKET
MOUNTING SCREWS
MOUNTING SCREWS
=
=
FASTEN FLUE TO UPPER BRACKET
WITH MOUNTING SCREWS
- 7 -