Broan K7388 manual NON-DUCTED Recirculation Filter Installation, Maintenance, Grease Filters

Models: K7388

1 40
Download 40 pages 23.92 Kb
Page 11
Image 11

NON-DUCTED

 

 

 

 

RECIRCULATION FILTER

 

 

INSTALLATION

 

 

 

1. Purchase a non-ducted recirculation filter

 

 

(B03300488) from your dealer.

 

 

2. Install the filter by pressing the 2 tabs on

 

NON-DUCTED

the filter down into the special housing

 

 

RECIRCULATION

and rotating upward.

 

 

FILTER

MAINTENANCE

 

 

 

 

 

 

Proper maintenance of the Range Hood will

 

 

assure proper performance of the unit.

 

 

Grease Filters

 

 

The grease filters must be cleaned

 

 

approximately once every 30 hours of

 

 

operation (when the central segment on the

 

 

display goes on or starts blinking).

 

 

Use a warm detergent solution. Grease filters

GREASE

 

are dishwasher safe.

FILTERS

 

Remove filter by pushing filter towards the

 

 

back of hood and rotating filter downward.

 

 

Non-ducted Recirculation Filter

 

 

The non-ducted recirculation filter should be

 

 

changed whenever the central segment of

 

 

the display starts blinking (i.e. every 120

 

 

hours of operation). To remove the filter press

 

 

inward on the clamp and rotate the filter

 

TABS

downward until the 2 tabs can be removed

 

 

from the housing.

 

NON-DUCTED

 

 

 

 

Hood Cleaning

CLAMP

RECIRCULATION

Stainless steel is one of the easiest materials

 

FILTER

 

 

 

 

to keep clean. Occasional care will help preserve its fine appearance.

Cleaning tips:

 

 

Hot water with soap or detergent is all that is usually needed.

Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to avoid water marks.

For discolorations or deposits that persist, use a non-scratching household cleanser or stainless steel polishing powder with a little water and a soft cloth.

For stubborn cases, use a plastic scouring pad or soft bristle brush together with cleaser and water. Rub lightly in direction of polishing lines or "grain" of the stainless finish. Avoid using too much pressure which may mar the surface.

DO NOT allow deposits to remain for long periods of time.

DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust.

DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these com- pounds contain chemicals which may be harmful. Rinse with water after expo- sure and wipe dry with a clean cloth.

Painted surfaces should be cleaned with warm water and mild detergent only. - 11 -

Page 11
Image 11
Broan K7388 NON-DUCTED Recirculation Filter Installation, Maintenance, Grease Filters, Non-ducted Recirculation Filter