NON-DUCTED
RECIRCULATION FILTER
INSTALLATION
1.Purchase a charcoal filter (B03300488) from your dealer.
2.Install the filter by pressing the 2 tabs on the filter down into the special housing and
rotating upward. | CHARCOAL |
| |
| FILTER |
MAINTENANCE
Proper maintenance of the Range Hood will assure proper performance of the unit.
Grease Filters
The grease filters should be cleaned fre- quently. Use a warm detergent solution. Grease filters are dishwasher safe.
GREASE FILTERS
Remove filter by pushing filter towards the | TABS |
back of hood and rotating filter downward. |
|
Charcoal Filter |
|
The charcoal filter should be changed every |
|
6 months. To remove the filter press inward |
|
on the clamp and rotate the filter downward |
|
until the 2 tabs can be removed from the | CLAMP |
housing. |
|
Hood Cleaning |
|
Stainless steel is one of the easiest materials |
|
to keep clean. Occasional care will help pre- |
|
serve its fine appearance. |
|
| |
Cleaning tips: |
|
•Hot water with soap or detergent is all that is usually needed.
•Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to avoid water marks.
•For discolorations or deposits that persist, use a
•For stubborn cases, use a plastic scouring pad or soft bristle brush together with cleanser and water. Rub lightly in direction of polishing lines or "grain" of the stainless finish. Avoid using too much pressure which may mar the surface.
•DO NOT allow deposits to remain for long periods of time.
•DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust.
•DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these com- pounds contain chemicals which may be harmful. Rinse with water after expo- sure and wipe dry with a clean cloth.
Painted surfaces should be cleaned with warm water and mild detergent only.
- 10 -
