Broan RM519004 Non - Ducted Configuration, CAUTION Do not use plastic or rigid metal ducting

PREPARE THE HOOD

NON - DUCTED CONFIGURATION

Note: The following materials must be purchased separately for non-ducted recirculation installations.

•Non - Ducted Recirculation Kit, Model RRK51

•1/16” diameter twist drill.

CAUTION: Do not use plastic or rigid metal ducting.

1.Discard discharge collar and damper supplied with the hood. Install the 5” to 6” adapter supplied with the Non-Ducted

Recirculation Kit. Fig. 7.	PLENUM
2.Measure the distance “A”.	(3) SCREWS
3.Attach aluminum flexible duct to the 5”	5” ALUMINUM	A
	FLEX DUCT
adapter. Tape all joints with duct tape.
Fig. 7.	5” 6” ADAPTER
4.Assemble the recirculation plenum to the	BLOWER
flexible duct. Fig. 7.	COLLAR

5.Drill three (3) 1/16” diameter equally spaced holes through the duct and duct

connector of the recirculation	plenum.
Fig.7.		FIG. 7

6.Secure duct to the plenum’s connector with (3) sheet metal screws (not included). Tape all joints with duct tape. Fig. 7.

PREPARE THE HOOD

NON - DUCTED CONFIGURATION, cont’d.

7.Carefully place the lower decorative flue into the recessed area of the range hood top. Fig. 6

8.Carefully slide the upper decorative flue down inside the lower flue.

Note: air vents must be up. Fig. 6

9.Secure the recirculation plenum to the upper flue with (4) flat head screws. Fig. 8

-8 -

	PLENUM
	4 FLAT
	HEAD
	SCREWS
UPPER
FLUE	FIG. 8