INSTALL MOUNTING
BRACKET
1.Construct wood wall framing that is flush with interior surface of wall studs.
Make sure:
a)the framing is centered over installation location.
b)the height of the framing will allow the mounting bracket to be secured to the framing within the dimensions shown.
2.After wall surface is finished, secure mount- ing bracket to framing using dimensions shown.
NOTE:
-On 8’ ceilings, the hood distance above cook top is :
minimum 24”, maximum 30” (for Ducted Configuration).
minimum 24”, maximum 28” (for Non- Ducted Configuration).
-On 9’ ceilings, the hood distance above cook top is :
minimum 26”, maximum 30” (the air vents on the upper flue will be exposed after installation).
FRAMING BEHIND DRYWALL
38- |
|
|
| |
1/16” | to |
|
| |
cooktop | above | |||
| ||||
|
|
|
INSTALL FLUE MOUNTING BRACKET
DUCTED AND NON-DUCTED
1.Assemble the flue mounting bracket, adjusting outside width as shown. Fig.4
2.Carefully center the mounting bracket directly over the range hood location.
3.Secure the bracket assembly to the ceiling using (2) 4.8x38mm mounting screws and drywall anchors. Make sure the bracket is pushed into the corner, tight against the wall and centered over the hood.
FLUE MOUNTING | 3.9 x 5.7mm |
|
BRACKET |
| |
| FLAT HEAD |
|
BRACKET SCREWS | ||
9 13/16” |
|
|
(249.8mm) |
|
|
| FIG. | 4 |
- 6 -
