Broan RM533604 manual Non-Ducted, Recirculation Filter, Installation, Maintenance, Grease Filters

Models: RM533604

1 40
Download 40 pages 60.25 Kb
Page 11
Image 11
NON-DUCTED

NON-DUCTED

 

 

RECIRCULATION FILTER

 

INSTALLATION

 

 

1. Purchase a non-ducted recirculation filter

 

(B03300488) from your dealer.

 

2. Install the filter by pressing the 2 tabs on

 

the filter down into the special housing and

 

rotating upward.

NON-DUCTED

 

 

RECIRCULATION

 

 

FILTER

MAINTENANCE

 

 

 

 

Proper maintenance of the Range Hood will

 

assure proper performance of the unit.

 

Grease Filters

 

The grease filters should be cleaned fre-

GREASE FILTERS

quently. Use a warm detergent solution.

Grease filters are dishwasher safe.

 

 

Remove filter by pushing filter towards the

 

back of hood and rotating filter downward.

 

Non-ducted recirculation Filter

TABS

The non-ducted recircualtion filter should be

 

changed every 6 months. To remove the filter

 

press inward on the clamp and rotate the filter

 

downward until the 2 tabs can be removed

 

from the housing.

 

Hood Cleaning

 

Stainless steel is one of the easiest materials

CLAMP

to keep clean. Occasional care will help pre-

 

serve its fine appearance.

 

 

Cleaning tips:

 

Hot water with soap or detergent is all that is usually needed.

Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to avoid water marks.

For discolorations or deposits that persist, use a non-scratching household cleanser or stainless steel polishing powder with a little water and a soft cloth.

For stubborn cases, use a plastic scouring pad or soft bristle brush together with cleanser and water. Rub lightly in direction of polishing lines or "grain" of the stainless finish. Avoid using too much pressure which may mar the surface.

DO NOT allow deposits to remain for long periods of time.

DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust.

DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these com- pounds contain chemicals which may be harmful. Rinse with water after expo- sure and wipe dry with a clean cloth.

Painted surfaces should be cleaned with warm water and mild detergent only.

- 11 -

Page 11
Image 11
Broan RM533604 manual Non-Ducted, Recirculation Filter, Installation, Maintenance, Grease Filters, Hood Cleaning