INSTALL MOUNTING
BRACKET
1.Construct wood wall framing that is flush with interior surface of wall studs.
Make sure:
a)the framing is centered over installation location.
b)the height of the framing will allow the mounting bracket to be secured to the framing within the dimensions shown.
2.After wall surface is finished, secure mount- ing bracket to framing using dimensions shown.
FRAMING BEHIND DRYWALL
37- |
|
|
|
|
7/16” | to | 43- |
| |
above |
| 7/16” | ||
| cooktop | |||
INSTALL FLUE MOUNTING BRACKET
DUCTED AND NON-DUCTED
1.Assemble the flue mounting bracket, adjusting outside width as shown. Fig.4
2.Carefully center the mounting bracket directly over the range hood location.
3.Secure the bracket assembly to the ceiling using (2) 4.8x38mm mounting screws and drywall anchors. Make sure the bracket is pushed into the corner, tight against the wall and centered over the hood.
FLUE MOUNTING | 3.9 x 6 mm |
|
BRACKET |
| |
| FLAT HEAD |
|
BRACKET SCREWS |
| |
|
| |
(249.8mm) |
|
|
| FIG. | 4 |
MOUNT THE PLATE
Mount the plate of the electrical system attaching it with (2) mounting screws (3.9x9.5mm).
- 7 -
MOUNTING SCREWS | PLATE OF | |
(3.9x9.5mm) | ||
THE | ||
| ||
| ELECTRICAL | |
| SYSTEM |
FIG. 5
