Brocade Communications Systems 2.1 manual switchconfig-radius-server-10.24.65.6#

	radius-server	2
Description	Use this command to configure attributes on the RADIUS server. If the RADIUS server doesn’t exist,
	it is added. If the RADIUS server already exists, then the attributes are changed.
Usage	Using the no form of the radius-server command sets the default values of the individual attributes.
Guidelines
Examples	Example of adding a RADIUS server:
	switch(config)# radius-server host 10.24.65.6 protocol chap retransmit 100
	switch(config-radius-server-10.24.65.6)#
	switch(config)# radius-server host 10.38.37.180 protocol pap
	key “new#virgo*secret timeout 10
See Also	None

Network OS Documentation Update	15
53-1002606-06