Brocade Communications Systems 2.1 manual show lldp neighbors, rbridge-id/slot/port detail

show lldp neighbors 2

show lldp neighbors

Displays LLDP information for all neighboring devices on the specified interface.

Synopsis	show lldp neighbors [interface {tengigabitethernet rbridge-id/slot/port gigabitethernet
	rbridge-id/slot/port}detail]
Operands	interface	Use this keyword to specify an Ethernet interface using the following
		operands:
	tengigabitethernet Specifies a valid 10 Gbps Ethernet interface.
	rbridge-id	Specifies a switch by its RBridge identifier.
	slot	Specifies a valid slot number.
	port	Specifies a valid port number.
	gigabitethernet	Specifies a valid 1 Gbps Ethernet interface.
	rbridge-id	Specifies a switch by its RBridge identifier.
	slot	Specifies a valid slot number.
	port	Specifies a valid port number.
	detail	Displays all the LLDP neighbor information in detail for the specified
		interface.
Defaults	None
Command	Privileged EXEC mode
Modes
Description	Use this command to display LLDP information for all neighboring devices on the specified
	interface.
	If you do not use the interface operand, only the mandatory TLVs are displayed.
Usage	The gigabitethernet rbridge-id/slot/portoperand is used only on the Brocade VDX 6710.
Guidelines
Examples	To display detailed LLDP neighbor information on a specific interface:
	switch# show lldp neighbors interface tengigabitethernet 3/0/8 detail
	Neighbors for Interface Te 3/0/8
	MANDATORY TLVs
	===============		Remote Interface: Te 3/0/8 (IF Name)
	Local Interface: Te 0/8
	Dead Interval: 120 secs		Remaining Life : 100 secs Tx: 536 Rx: 535

Chassis ID: 0005.1e76.1020 (MAC)

Remote Mac: 0005.1e76.102c

OPTIONAL TLVs

==============

Port Interface Description: Te 3/0/8

System Name: sw0

Network OS Documentation Update	17
53-1002606-06