ENTERPRISE & MOBILITY | DEPLOYMENT GUIDE |
|
|
2.Click Adaptive AP Setup:
a.Using DNS, enter the FQDN of the controller.
b.Enter the controller IP addresses.
c.Click the Auto Discovery Enable checkbox.
NOTE: When the Auto Discovery Enable checkbox is selected, the access point begins the controller discovery (adoption) process using DHCP first, then a
d.Enter the PSK for the controller.
Step 5: Adopt AP7131 in the RFS7000
1.Go to Network > Access Point and click the Unadopted AP tab.
2.Referencing the correct MAC address, select the correct AP to adopt and click Adopt. Once the AP has been adopted, it can be found in the Adopted tab.
© 2010 Brocade Communications Systems, Inc. All Rights Reserved. 06/10
Brocade, the
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the United States government.
Deploying Brocade Mobility Products with the Brocade FastIron CX Series | Page 16 of 16 |