WHAT’S in the BOX

ENTERPRISE & MOBILITY	DEPLOYMENT GUIDE

Brocade FCX 624S-HPOE

•Brocade FastIron CX device

•115V AC power cable (for AC sourced devices)

•Rack-mount brackets

•Warranty card

•A straight-through EIA or TIA DB-9 serial cable (F/F).

Brocade RFS7000

•Mobility RFS7000 Controller with rack brackets installed

•Console cable

•Deploying Brocade Mobility Products with the Brocade FastIron CX Series (this document)

•China RoHS compliance document

Brocade AP300 (internal antenna)

•Brocade Mobility 300 antenna

•2 x screws

•2 x wall anchors

•Quick Installation Guide (hardware only, no configuration)

Brocade AP7131

•Mobility 7131 model access point (accessories depend on SKU ordered)

•Deploying Brocade Mobility Products with the Brocade FastIron CX Series (this document)

•Wall mount screw and anchor kit

•Accessories Bag (4 x rubber feet, LED light pipe, badge with label for above-the-ceiling installation)

•China RoHS compliance addendum

Brocade AP5181

•Mobility 5181 802.11 a+bg dual-radio access point

•Deploying Brocade Mobility Products with the Brocade FastIron CX Series (this document)

•Set of cable connectors

•3 x antenna connector dust covers

•2 x connector cover AP67 jacks, plus chain_LTW-M9/14-SB

•Waste Electrical and Equipment (WEEE) addendum

Deploying Brocade Mobility Products with the Brocade FastIron CX Series

Page 7 of 16

Brocade Communications Systems FCX624S-HPOE manual WHAT’S in the BOX