BHA & BHAX Assembly
Attention: If applicable, remove protective film from parts before installation.
1.Remove the surround from the shipping box and place the BHA surround into position in the constructed enclosure. See Figure 1.
3.Place the grease tray into BHA surround by sliding it under the bracket. See Figure 3.
BHAASSEMBLY
GREASE TRAY
Figure 1
2.Secure the BHA surround to the enclosure using eight
(8) 8 x 3/4” Hex Head Screw screws. See Figure 2. Note: If you have a masonry structure you may need to substitute for the appropriate masonry fasteners.
Figure 2
Figure 3
4.Place the control housing assembly into BHA surround and secure it to the BHA surround. See Figure 4.
BHAASSEMBLY
CONTROL HOUSING
ASSEMBLY
Figure 4
5.Attach the flex line to the bottom of the BHA surround using the flex line bracket and screw. See Figure 5.
Figure 5
Page 8 |
