Broilmaster C3-1 Grill Assembly, Before You Begin, Recommended Tools, Remove Lid From Bottom

GRILL ASSEMBLY

Grill Mountings

Assemble your base option before assembling your Broilmas- ter grill head.

Refer to the Broilmaster Cart, Base, and Post instructions provided with each accessory for assembly, installation, and mounting pro- cedures.

Before You Begin

All Broilmaster grills require some assembly and installation. Follow all instructions unless noted to apply only to other specific models.

If you purchased an accessory with your Broilmaster, follow the instructions provided with the accessory for assembly and installation. If an instruction refers to a step that is not required for your grill model, please continue to the next step.

Compare the parts found in the shipping container to the parts list provided. If any parts are missing contact your Broilmaster dealer before beginning assembly.

CAUTION: Parts may have sharp edges. Wear leather work gloves and handle parts carefully during the unpacking, as- sembly and installation.

Recommended Tools

These items are recommended for the assembly of your grill:

•Phillips screwdriver

•Adjustable wrench

•Socket set

•1/8” Allen Wrench

•Cordless Drill with Phillips Bit

Note: Built-in Kit can not be used with Independence Charcoal Grill.

Remove Lid From Bottom

1.To ease installation, remove the grill body top from the grill body bottom by removing the two hinge pins and clips. See Figure 1.

REAR OF GRILL

Figure 1

Install Grill Body Bottom on Mounting (cart or posts) Note: When mounting to a patio post or in-ground post the four “carriage bolts” and nuts in the post mounting holes located on the grill bottom must be removed and relocated to the four out- side cart mounting holes marked by arrows. See Figure 2.

Figure 2

1.Refer to the cart or post installation instructions that came with the mounting options to attach grill body bottom to mounting option.

B102097-0-0113 Page 9