Broilmaster C3-1 owner manual Upper Spark Arrester Plate, Handle, See Figure

GRILL ASSEMBLY

2.Attach vent stop using one #10-24 x 1-1/4 pan-head screw and spacer on the right side of the top vent opening. Tighten with #10-24 lock nut from underside of grill body top. Use hand tools. See Figure 7.

Figure 7

3.Place the smoke vent assembly on top vent opening and secure with one #10-24 x 1-1/4 pan-head screw and one

#10-24 locknut on underside of grill body top. Do not tighten so much that the vent cannot swing open and close freely. Use hand tools. See Figure 8.

Upper Spark Arrester Plate

1.Secure the upper spark arrester plate to the inside of the grill body top using four #10-16 x 3/4” pan-head screws as shown in Figure 9.

Figure 9

Handle

Tip: For ease of installation, slightly lubricate the front handle with liquid soap before pushing the foam grip into place. See Figure 10.

Figure 10

Fasten the front handle to the grill lid with two #10-24 x 1” screws.

See Figure 11.

Figure 8

Figure 11

B102097-0-0113 Page 11