Broilmaster H3X-1, H4XN-1, H3XPK-1, H4X-1 Propane Gas Grills, Grill Location, Cylinder Requirements

Models: P4X-1

1 56
Download 56 pages 55.84 Kb
Page 18
Image 18
PROPANE GAS GRILLS

PROPANE GAS GRILLS

Grill Location

When choosing the ideal location for your Broilmaster® Premium Gas Grill, remember this grill is designed for outdoor use ONLY.

You should never install or operate your grill in any building, garage, or other enclosed area.

For your safety, this grill should not be installed or operated under any combustible materials, such as carports, covered porches, awnings, or overhangs.

Never install or operate your grill in or on any recreational vehicle or boat.

CAUTION: The installation and operation of this grill at clear- ances less than specified below may lead to the possibility of fire, property damage, or personal injury.

A minimum clearance of sixteen inches (16") is required from the sides of the grill to any combustible material.

A minimum clearance of eighteen inches (18") is required from the back of the grill to any combustible material.

Some examples of combustible materials are a wall, a fence, patio furniture, or the wall of your home.

The area surrounding the grill should be clear to ensure proper ventilation. Do not obstruct the flow of combustion and ventilation air in any way. The ventilation openings on the propane cylinder enclosure must also remain free and clear of debris.

Portable grills should be level and positioned away from direct wind prior to each use.

Grill Location WARNING: Do not install or operate this grill where gaso- line or other flammable materials are used or stored. Failure to comply with this warning could result in explosion or fire causing property damage or personal injury.

Cylinder Requirements

Your Broilmaster® Premium Gas Grill requires a standard twenty (20) pound propane gas cylinder.

The maximum height allowable for a replacement cylinder is ap- proximately twelve (12") inches (30.5 centimeters).

The propane gas cylinder used must be:

1.Constructed and marked in accordance with the specifications for LP gas cylinder of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres, and Tubes for Transportation of Dangerous Goods; and Commission as applicable.

2.Provided with a listed overfilling protection device (OPD).

3.Provided with a listed safety device having direct access with the vapor space of the cylinder and the cylinder supply system must be arranged for vapor removal.

4.Provided with a shutoff valve terminating in a valve outlet as specified in the Standard for Compressed Gas Cylinder Outlet and Inlet Connections, ANSICGA-V-1.

5.Provided with a plug to effectively seal off the cylinder outlet when the cylinder is being stored or transported.

6.Provided with a collar to protect the cylinder valve.

Caution: Do not use a propane gas cylinder which has a capacity greater than twenty (20) pounds with this grill and side burner.

Page 18

B101623-2-0112

Page 18
Image 18
Broilmaster H3X-1, H4XN-1, H3XPK-1, H4PK-1, H3XN-1, H4X-1, P4XN-1 Propane Gas Grills, Grill Location, Cylinder Requirements