![1.Mount grill onto cart, post or base per the mounting in- structions.](/images/new-backgrounds/83068/8306819x1.webp)
GRILL ASSEMBLY
1.Mount grill onto cart, post or base per the mounting in- structions.
2.Place radiation shield (13) (flange side up) onto four raised bosses located on the interior bottom of the grill. Secure with four
Figure 1
3.R3B model only: Slide ignitor spacer (11) onto collec- tor box assembly (10) and secure with nuts.
See Figure 2.
Figure 2
Attention: Do not cut or damage ignitor wires.
4.R3B model only: Insert collector box assembly into hole adjacent to burner. The opening of the collector box should be facing the burner. The infrared ignitor wire slides through the empty hole next to the burner.
See Figure 3.
R3B
R3
Figure 3
Page 10 |