Brother 1435 2Install the Drum Unit Assembly

Setting Up Your Printer

Do NOT connect the interface cable.

Connecting the interface cable is

done when installing the driver.

1Open the front cover.

2Unpack the drum unit assembly.

Remove the protective part.

3Rock it from side to side several times to

distribute the toner evenly inside the

assembly.

4Put the drum unit assembly into the printer.

5Close the front cover of the printer.

2Install the Drum Unit Assembly

Front cover

Protective part

Step 1

Drum unit assembly

Contents

Main Quick Setup Guide Setup is Complete! Step 1 USB Setting Up Your Printer Safety Precautions Warning To Use the Printer Safely Table of Contents Getting Started Setting Up Your Printer Installing the Driver For USB Interface Cable Users ................................................................12 Regulations "EC" Declaration of Conformity Manufacture FDA Regulations (100 to 120 volt Model Only) IEC 60825 specification (220 to 240 volt model only) For Finland and Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT Internal laser radiation IMPORTANT - For Your Safety Getting Started Carton Components Printer LED Indications Control Panel LED Button Drum Ready Alarm Paper Toner Supplied CD-ROM 1 2 3 1 1Insert the CD-ROM into the CD-ROM Drive For Windows Users For Macintosh Users 2Install the Drum Unit Assembly 1 2 5 3 3Load Paper in the Paper Tray 1 2 3 4 4Print a Test Page For USB Interface Cable Users CANCE L 6 7 2. Setting Your Printer as the Default Printer (For Windows 2000/XP Users Only) 1 2 CANCE L Page For Mac OS 8.6 to 9.2 Users For Mac OS X 10.1 to 10.2 Users Page Other Information Options 3 1 2 Options You can expand the capability of the printer by adding IR-1000. Options