Brother 1435 For Mac OS 8.6 to 9.2 Users

Installing the Driver

Installing the Driver & Connecting the Printer to your Macintosh

1Click Connect the interface cable &

Install the driver/utility from the Initial

Setup menu.

2Follow the on-screen instructions, and

restart your Macintosh.

3Make sure the printer power switch is on.

4Connect the USB interface cable to your

Macintosh, and then connect it to the

printer.

5Open the Chooser from the Apple menu.

6Click the Brother Laser and select

HL-14XX series.

Close the Chooser.

The setup is now complete.

For USB Interface Cable Users

For Mac® OS 8.6 to 9.2 Users

Do not connect the USB cable to the

keyboard USB Port or a non-powered

USB Hub.

Step 2

Contents

Main Quick Setup Guide Setup is Complete! Step 1 USB Setting Up Your Printer Safety Precautions Warning To Use the Printer Safely Table of Contents Getting Started Setting Up Your Printer Installing the Driver For USB Interface Cable Users ................................................................12 Regulations "EC" Declaration of Conformity Manufacture FDA Regulations (100 to 120 volt Model Only) IEC 60825 specification (220 to 240 volt model only) For Finland and Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT Internal laser radiation IMPORTANT - For Your Safety Getting Started Carton Components Printer LED Indications Control Panel LED Button Drum Ready Alarm Paper Toner Supplied CD-ROM 1 2 3 1 1Insert the CD-ROM into the CD-ROM Drive For Windows Users For Macintosh Users 2Install the Drum Unit Assembly 1 2 5 3 3Load Paper in the Paper Tray 1 2 3 4 4Print a Test Page For USB Interface Cable Users CANCE L 6 7 2. Setting Your Printer as the Default Printer (For Windows 2000/XP Users Only) 1 2 CANCE L Page For Mac OS 8.6 to 9.2 Users For Mac OS X 10.1 to 10.2 Users Page Other Information Options 3 1 2 Options You can expand the capability of the printer by adding IR-1000. Options