Brother 1435 4Print a Test Page

Setting Up Your Printer

Do NOT connect the interface cable.

Connecting the interface cable is

done when installing the driver.

1Make sure that the printer power switch is

off.

2Connet the AC power cord to the printer,

and then plug the AC power cord into an AC

outlet.

3Turn the power switch on.

4After the printer has finished warming up,

the Ready LED stops blinking and stays

green.

5Press the control panel button. The printer

prints a test page.

Check that the test page has printed

correctly.

4Print a Test Page

I O

Alarm

Ready

Data

Paper

Toner

Extend the

Support flap.

Drum

Alarm

Ready

Data

Paper

Toner

Go to the next page

to install the driver.

Step 1

Contents

Main Quick Setup Guide Setup is Complete! Step 1 USB Setting Up Your Printer Safety Precautions Warning To Use the Printer Safely Table of Contents Getting Started Setting Up Your Printer Installing the Driver For USB Interface Cable Users ................................................................12 Regulations "EC" Declaration of Conformity Manufacture FDA Regulations (100 to 120 volt Model Only) IEC 60825 specification (220 to 240 volt model only) For Finland and Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT Internal laser radiation IMPORTANT - For Your Safety Getting Started Carton Components Printer LED Indications Control Panel LED Button Drum Ready Alarm Paper Toner Supplied CD-ROM 1 2 3 1 1Insert the CD-ROM into the CD-ROM Drive For Windows Users For Macintosh Users 2Install the Drum Unit Assembly 1 2 5 3 3Load Paper in the Paper Tray 1 2 3 4 4Print a Test Page For USB Interface Cable Users CANCE L 6 7 2. Setting Your Printer as the Default Printer (For Windows 2000/XP Users Only) 1 2 CANCE L Page For Mac OS 8.6 to 9.2 Users For Mac OS X 10.1 to 10.2 Users Page Other Information Options 3 1 2 Options You can expand the capability of the printer by adding IR-1000. Options