Brother 1435 CANCE, L

Installing the Driver

1. Installing the Driver and Connecting the Printer to Your PC

1Make sure the USB interface cable is NOT

connected to the printer, and then begin

installing the driver. If you have already

connected the cable, remove it.

2Click Connect the interface cable &

Install the driver/utility from the Initial

Setup menu.

3Select the USB interface.

4Click the Install button.

5Click the Next button.

Follow the on-screen instructions.

For USB Interface Cable Users

If the Found New Hardware Wizard

appears on your PC, click the Cancel

button.

CANCE

Continue to

the next page

Step 2

Contents

Main Quick Setup Guide Setup is Complete! Step 1 USB Setting Up Your Printer Safety Precautions Warning To Use the Printer Safely Table of Contents Getting Started Setting Up Your Printer Installing the Driver For USB Interface Cable Users ................................................................12 Regulations "EC" Declaration of Conformity Manufacture FDA Regulations (100 to 120 volt Model Only) IEC 60825 specification (220 to 240 volt model only) For Finland and Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT Internal laser radiation IMPORTANT - For Your Safety Getting Started Carton Components Printer LED Indications Control Panel LED Button Drum Ready Alarm Paper Toner Supplied CD-ROM 1 2 3 1 1Insert the CD-ROM into the CD-ROM Drive For Windows Users For Macintosh Users 2Install the Drum Unit Assembly 1 2 5 3 3Load Paper in the Paper Tray 1 2 3 4 4Print a Test Page For USB Interface Cable Users CANCE L 6 7 2. Setting Your Printer as the Default Printer (For Windows 2000/XP Users Only) 1 2 CANCE L Page For Mac OS 8.6 to 9.2 Users For Mac OS X 10.1 to 10.2 Users Page Other Information Options 3 1 2 Options You can expand the capability of the printer by adding IR-1000. Options