Brother 2460 Error Message List, Cause, PANEL, MINIMUM, REACHED, CHANGED, Solution, 4 DIGITS, Appendix, BUFFER FULL, 7 LINE LIMIT, BUFFER EMPTY, Error Message

Error Message List

Error Message		Cause		Solution
	• This message appears if you			• Cancel the Numbering
	try to use the Numbering			function.
1 BLOCK LIMIT!	function when multiple			• Limit the number of text
	blocks of text have been			blocks to 1.
	entered with the PANEL
	Label Type mode selected.
4 DIGITS	• This message appears if less			• Enter a minimum of four
	than the minimum four			digits before pressing
MINIMUM!	digits are entered as the bar			n.
	code data.
	• This message appears if 50			• Limit the number of text
50 LINE LIMIT	text blocks have already			blocks to 50.
REACHED!	been entered when you press
	g, then n.
	• This message appears if 7			• Limit the number of lines in
	lines have already been			a text block to 7.
	entered in a text block when
7 LINE LIMIT!	you press n.
	• This message appears if you			• Adjust the number of lines
	delete		, causing the	so that the block will not
	number of lines in a block to			have more than 7 lines.
	exceed the 7-line limit.
	• This message appears if no			• Type in some text before
BUFFER EMPTY!	text has been typed in when			trying to perform any of
	you try to print or Preview			these operations.
	function.
	• This message appears if you			• Delete some existing text
	try to add a character, a			before trying to add any
	space, a new line, a new			more.
BUFFER FULL!	block, a symbol, an accented
	character or a bar code after
	the maximum number of
	characters has already been
	entered.
CASSETTE	• This message appears if the			• Change the tape cassette
	tape cassette was changed			back again.
CHANGED!	while the P-touch paused for
	the tape to be cut.

Appendix

41