INITIAL SETUP 4 - 5
Setting Volume Amplify
1
Press Menu/Set, 1, 4.
2
Press or to select
VOL AMPLIFY:OFF? if none of the users
are hearing-impaired and go to Step 4.
OR
If some or all of the users are hearing-impaired, select
VOL AMPLIFY:ON?.
Press Menu/Set.
3
Press or to select PERMANENT? if all the users are
hearing-impaired.
OR
Select TEMPORARY? if only some of the users are hearing-impaired.
4
Press Menu/Set.
5
Press Stop/Exit.
Setting the Ring Volume
You can adjust the ring volume when your machine is idle. You can select a ring
volume level or press until the ring is off.
Press or to adjust the volume level. With each key press, your
machine rings so you can hear the current setting and the screen displays the
setting you are choosing. Each key press changes the volume to the next setting.
The new setting will remain until you change it again.
Memory Storage
In the event of a power failure, all settings in the INITIAL SETUP, SETUP RECEIVE
and SET QUICK-DIAL plus the COVERPG SETUP and COVERPAGE MSG (from
SETUP SEND) operations are stored permanently. You may have to reset the date
and time.
Please carefully read Choosing the Handset Volume (For Volume Amplify),
page 4-4 before you do the following steps:

4.VOLUME AMPLIFY