MAKING COPIES 10 - 2
Copy options: Single or Multiple copies, Sort/Stack, Reduce/EnlargeYou can choose additional c opy options. First, you ca n select the number of copies .
Next, you can choose whether multiple copies will be
STACKED
(all copies of page
1, then all copies of page 2, etc.) or
SORTED
(collated). Finally, you c an choose an
enlargement or reduction ratio. To au tomatically reduce the copy to the paper size you
have set for the paper tray, select
AUTO
. To reduce the copy by a fixe d percentage,
choose
93%
,
87%
,
75%
or
50%
. Or, to enlarge the copy, select
150%
,
125%
or
120%
.
To copy a document at its origi nal size, select
100%
.
1
Insert the original face down in the ADF.
2
Press Copy/Reports.
3
Enter the number of copies you want (1-99).
To start copying now, press
Copy/Reports.
If you would like to select additional copy options, like SORT, ELG/RDC
(Enlarge or Reduce) press Menu/Set.
4
Press or to select SORT or STACK.
To start copying now without enlarging or reducing, press
Copy/Reports.
To reduce or enlarge the image, press
Menu/Set.
5
Press or to select an enlargement
or reduction ratio.
6
Press Copy/Reports.
If you are making multiple copies and get a OUT OF MEMORY message while
you are scanning the first page, press Stop/Exit to cancel the job. Then make
a single copy. If you selected SORT and the OUT OF MEMORY message
appears while scanning subsequent pages, you can press Copy/Reports to
copy the portion that is in memory, or press Stop/Exit to cancel. To restart
the copy job using less memory, press Copy/Reports for stacked copies.
The default resolution for multiple copies or reducing and enlarging copies is
FINE. Set the resolution to S.FINE for small print or artwork and PHOTO for
photographs by using the Resolution key. S.FINE and PHOTO resolutions
use up more memory than FINE mode.