ERROR MESSAGES

Marks

Error Messages

 

Cause/Solution

 

 

 

 

 

 

 

 

OK to delete the setting?

This message appears when

or

is pressed to

 

 

 

 

delete the settings for a utility stitch. To delete the selected

 

 

settings, press

.

 

 

 

 

 

 

Preventive maintenance is recommended.

This message is displayed when the machine needs to be

 

 

maintained. (see page A-15)

 

 

 

 

 

 

Raise the buttonhole lever.

This message is displayed when the buttonhole lever is down,

 

 

a stitch other than a buttonhole is selected, and the

 

 

“Start/Stop” button or the “Reverse Stitch” button is pushed.

 

 

 

 

Sensor module error.

This message appears when something is wrong with the

 

 

sensor unit of the machine. Consult your authorized dealer.

 

 

 

 

Set the clock.

This message appears when the time/date is not set. Set

 

 

time/date. (see page B-20)

 

 

 

 

 

 

The bobbin thread is almost empty.

This message is displayed when the bobbin thread is running

 

 

out.

 

 

 

 

 

 

 

The bobbin winder safety device has activated. Is the thread

This message is displayed when the bobbin is being wound,

 

tangled?

and the motor locks because the thread is tangled, etc.

 

 

 

 

The ending point cannot be selected for this stitch.

This message appears when the function to specify the sewing

 

 

end point cannot be used with the current stitch. Select other

 

 

stitch. (see page B-69)

 

 

 

 

 

 

 

The needle position cannot be changed for this stitch.

This message appears when the function to specify the needle

 

 

drop position cannot be used with the current stitch. Select

 

 

other stitch. (see page B-69)

 

 

 

 

 

 

The needle will move. Keep your hands etc. away from the

This message appears when you touch the point closer than 2

 

needle area.

cm from the needle drop point with the sensor pen in the

 

 

sensor function. (see page B-61)

 

 

 

 

 

 

The pockets are full. Delete a pattern.

This message is displayed when the memory is full and a

 

 

pattern must be deleted.

 

 

 

 

 

 

The safety device has been activated.Is the thread tangled? Is

This message is displayed when the motor locks due to

 

the needle bent?

tangled thread or for other reasons related to thread delivery.

 

 

 

 

The shutoff support mode has been activated. Turn off the

This message appears when the machine is in the shutoff

 

machine.

support mode. Turn off the machine once to start the machine

 

 

again. (see page B-28)

 

 

 

 

 

 

 

The “Start/Stop” button does not operate with the foot

This message is displayed when the “Start/Stop” button is

 

controller attached. Remove the foot controller.

pushed to sew Utility stitches or Character/Decorative stitches

 

 

while the foot controller is connected.

 

 

 

 

 

The upper thread may not be threaded correctly. Thread the

This message is displayed when it seems that the upper

 

upper thread from the beginning.

thread has not been threaded correctly.

 

 

 

 

 

The USB media was changed. Do not change the USB media

This message is displayed when you attempt to select a

 

while it is being read.

pattern after the USB media in which the pattern is saved has

 

 

been changed.

 

 

 

 

 

 

 

There is no needle plate cover. Attach a needle plate cover.

This message is displayed when the needle plate cover is not

 

 

attached.

 

 

 

 

 

 

 

This file cannot be used.

This message appears if the file format is incompatible with

 

 

this machine. Check the list of compatible file formats. (see

 

 

page S-94)

 

 

 

 

 

 

 

This file exceeds the data capacity and cannot be used. Use a

This message is displayed when the file size exceeds the data

 

suitable size file.

capacity of the machine.

 

 

 

 

Confirm the file size and format. (see page S-95)

 

 

 

 

This function cannot be used while in the sensor mode.

This message appears when the selected function is not

 

 

available with the sensor function. (see page B-59)

 

 

 

 

 

 

 

This key cannot be used at this time.

This message is displayed when you press

in

 

 

 

 

the screen other than the Utility Stitch, or press

 

 

 

in the screen other than the Utility Stitch or

 

 

Character/Decorative Stitch.

 

 

 

 

 

 

 

 

A-30