Brother 882-D00 Note, Memo, Note, Note, fPress to apply the first point of the stitching width, hPress to apply the second point of the stitching width

USING SENSOR FUNCTIONS WITH SEWING STITCH

Note

•The following error message appears if the area outside of the sensor pen touch range

is touched. Press , and then touch within the sensor pen touch range.

Memo

•The position can be precisely adjusted by touching the adjustment areas with the sensor pen.

fPress to apply the first point of the stitching width.

* The setting can also be applied by long touching an adjustment area with the sensor pen.

gWith the sensor pen, touch the second point for the stitching width.

→The distance from the left reference line to the touched position appears in the stitching width setting screen.

→The stitch preview on the upper left side of the screen is updated according to the specified setting.

→The guideline marker moves to the touched position and flashes.

Note

•If the distance between the specified first and second points is wider than the maximum stitch width for the selected stitch pattern, the second point cannot be specified. Specify a location closer to the first point.

•If the distance between the specified first and second points is narrower than the minimum stitch width for the selected stitch pattern, the second point cannot be specified. Specify a location further away from the first point.

hPress to apply the second point of the stitching width.

*The setting can also be applied by long touching an adjustment area with the sensor pen.

→The needle moves to the specified position to start sewing.

→The stitch selection screen appears again, and the stitch width and “L/R SHIFT” change according to the settings specified with the sensor pen.

Note

•With multiple patterns that have been combined, the specified stitching width is applied to the pattern with the largest stitch width. With patterns other than combined patterns, the stitch width is adjusted to the stitching width specified for the pattern with the largest stitch width.

•With multiple patterns that have been combined, the settings specified for the stitch width and “L/R SHIFT” in the stitch selection screen are for the first pattern to be sewn. The value may differ from the stitch width setting.

•With twin needle sewing, the stitching width is specified with the left needle as the reference.

B-68