Brother 9560CDW SHARED, DEVICES, Print & Fax, Image Capture, Using Image Capture

Scanning

Scanning a document using the ICA driver (Mac OS X 10.6.x)

You can scan a document using one of the following methods:

Using the Image Capture application

Scanning directly from the “Print & Fax” section

Using Image Capture

In order to use Image Capture included with Mac OS X 10.6.x, the ICA Scanner Driver is required. The Brother CUPS Printer Driver for Mac OS X 10.6.x contains the ICA Scanner Driver. To install the ICA Scanner Driver, go to the downloads selection located on the main page for your model on the Brother Solutions Center (http://solutions.brother.com/).

a Connect your Brother machine to the Macintosh using a USB cable. Or connect your Brother machine to the same LAN (if you are using a network model) where the Macintosh is connected.

b Launch the Image Capture application.

9

c Select the machine from the list on the left side of the screen.

If you connected the Brother machine and your Macintosh with a USB cable, you will see the machine in the DEVICES area. If connected via LAN, you will see it in the SHARED area.

157