Troubleshooting and Routine Maintenance
24
4
Routine maintenance 4
Charging the battery 4
If your battery is getting low, you should
charge the battery. You can see the battery
strength at the bottom right of the LCD.
aMake sure the AC adapter of the cradle
or the machine (base unit) is connected
to an AC power outlet.
bPlace the cordless handset in the cradle
with the dial pad facing forward.
Cleaning 4
Clean the outside of the cordless handset
with a soft cloth. You should also clean the
charger contacts. If the charger contacts are
not clean, the battery may not be charged.
CAUTION
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
cordless handset.
DO NOT use cleaning materials that
contain ammonia.
DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
No Caller ID There is no incoming call history.
You did not receive calls or you
have not subscribed to the Caller ID
service from your telephone
company.
If you want to use the Caller ID feature call your
telephone company. (See Caller ID in the User’s
Guide.)
Power Off The On/Off key on the machine
(base unit) is off.
If you want to make a phone call, turn on the
machine (base unit). Then press the
(TALK) key on the codeless
handset to go back to standby mode.
Searching for
Base Unit
(Base Unit
not detected)
The cordless handset is too far from
the machine (base unit).
Bring the cordless handset closer to the machine
(base unit).
You have not registered the
cordless handset.
Register the cordless handset. (See Registering
additional cordless handsets on page 3.)
Error Message Cause Action