Brother BES-961BC, BES-1261BC instruction manual Spindle mechanism is faulty

				Chapter 9 List of Error Codes
Code	Error			Measures
E-31
E-32
E-33
E-34		Set the embroidering area again or move the hoop to a
	Area over	sewable position.
E-36
E-38
E-39
E-3C
E-A1	Main(Z) motor lock	Press	. If the same error occurs frequently, the
			STOP
		spindle mechanism is faulty.
E-A2	Main PCB temperature is too high	Turn the power off once, then on again. If the same
		error occurs again, the spindle motor or main PC board
E-A3	Main(Z) motor voltage is too low
		is faulty.
E-A4	Main(Z) motor voltage is too high
E-B0	Lower shaft CPU error	Press	STOP .
E-B1	Thread jammed in rotary hook	Check that no lint is tangled in the rotary hook and press
		.
E-B2	Hook motor origin point error
		STOP
E-B3	Hook motor standby position error	Press	STOP .
E-B4	Hook motor mode error
E-B5	Hook motor communication error
E-B6	Hook motor parameter error
E-B7	Hook motor overheat error	Turn the power off once, then on again. If the same error
		occurs again, the lower shaft or fan motor is stopped main
E-B8	Hook motor overcurrent error
		PC board is faulty.
	Turn off the power
E-B9	Thread trimming motor origin point error	Turn the power off, and check the thread trimming
		mechanism. Press		. If the same error occurs
				STOP
		again, the thread trimming mechanism is faulty.

BES-961BC • BES-1261BC 153