Brother CS6000I Sewing thin fabrics, Sewing stretch fabrics, Using a free-arm style

■If thick seams are being sewn and the fabric does not feed at the beginning of stitching

Zigzag foot “J” is equipped with a feature that keeps the presser foot level.

aSewing direction

aWhen you encounter a seam that is too thick to feed under the foot, raise the presser foot lever.

bPress the black button on the left side of the foot. Keep the button held in and lower the presser foot.

aBlack button

cRelease the button. The foot will lock in place level with the seam, allowing the fabric to feed.

•Once the trouble spot has been passed, the foot will return to its normal position.

CAUTION

●If fabric more than 6 mm (15/64 inch) thick is sewn or if the fabric is pushed with too much force, the needle may bend or break.

Sewing thin fabrics

When sewing thin fabrics, the stitching may become misaligned or the fabric may not feed correctly. If this occurs, place thin paper or stabilizer material under the fabric and sew it together with the fabric. When you have finished sewing, tear off any excess paper.

2

aStabilizer material or paper

Sewing stretch fabrics

First, baste the pieces of fabric together, and then sew without stretching the fabric.

aBasting

Using a free-arm style

Free-arm sewing is convenient for sewing tubular and hard-to-reach areas. To change your machine to the free-arm style, lift out the flat bed attachment.

aSlide the flat bed attachment to the left to release it.

aFlat bed attachment

31