11 - 1 USING YOUR DCP WITH A MACINTOSH®
11
Setting up your USB-equipped Apple®
Macintosh®
The features supported by the DCP will depend on the operating
system you are using. The chart below shows which features are
supported.
*1 For Mac OS® X 10.2 users, please upgrade to Mac OS® X 10.2.1
or greater. (For the latest information for Mac OS® X, please visit at:
http://solutions.brother.com)

Using your DCP with a

Macintosh®
Before you can connect the DCP to your Macintosh®, you
must buy a USB cable that is not longer than 1.8 metres.
Do not connect the DCP to a USB port on a key board or
a non-powered USB hub.
Some descriptions in this chapter are based on the
DCP-8025D. These descriptions also apply to the
DCP-8020.
Feature Mac OS®Mac OS® X
8.6 9.X 10.1 10.2.1 or
greater*1
Printing Yes Yes Yes Yes
Scanning (TWAIN) Yes Yes No Yes